This intercooler will fit 2003-06 Dodge trucks and includes all the hoses and clamps needed for the install. You may have started with the performance box or tuner, added an intake and exhaust, then a turbo to reduce EGT's, then injectors etc... Make your system complete with the added cooling benefits of a new intercooler. You can further reduce your EGT's and keep your box from defueling when your EGT's get too high. Here's what BD has to say about their intercooler: Don’t Lose Your Cool. Gain it--with the new Cool-It Intercooler from BD. 500° Fahrenheit... That's enough heat to cook a five-pound chicken in 45 minutes. It's also the temperature of the air going into your stock intercooler. Compressed air is heated air and when you combine an aggressive fuel curve with elevated boost levels, that can lead to convection oven levels of inlet temperature. That's why BD developed the new Cool-It intercooler. With 57% more cooling surface area and a 33% thicker core (2.68" versus 2"), the Cool-It increases cooling effectivness to approximately 90%, compared to only 70% for the stock intercooler. That can mean a temperature reduction of up to 200° Fahrenheit over the stock intercooler. At the same time, the 36% larger inlet and discharge tubes (3.125" versus 2.625")can handle up to 100 psi of boost and over 1500 cfm, while holding pressure drop to less than 1 psi. We guarantee this is the highest quality, best performing air-air intercooler on the market. Our extruded tube design out performs other inferior Bar & Plate and Tube & Fin designs. The core size alone is 2.68” x 28” x 26”. The intercooler end tanks are precision hand welded for increased strength and a beautiful finish. Increased air flow, reduced air intake temperature, lower EGT's and higher HP, that's what you can expect from BD's new Cool-It intercooler. All kits come complete with high-pressure hoses and clamps, and are ready for shipment. Call us today to find a dealer near you! Resources: Image(s): Internal picture